HOME > PRODUCTS > SPECIAL PART FORMER > 5 STATION SPECIAL BOLT PART FORMER BP-SERIES

5 STATION SPECIAL BOLT PART FORMER BP-SERIES

A. BP19B-5S

TRANSFER CHUCK FINGER MECHANISM:

All PF series models use an Over Arm main slide which increases the stability during formation process, and the P.K.O. system that allows more varieties of products to be produced.
B. BP19B-5S

AIR CLUTCH / BRAKE SYSTEM:

Air clutch and air brake both available according to customer’s need. (Optional)
C. BP13B-5S

P.K.O MECHANISM:

According to customer’s need, P.K.O. stroke can be individually adjusted & simply setting P.K.O. cam in the 3 position; tools change can be done in short time.
D. BP13B-5S

MAIN CRANKSHAFT & BACKSHAFT:

Power ring assures firmly connected between crankshaft and flywheel, allow safety slipping to prevent any damage when accident happen. Additional Backshaft device for large-sized former; with protection against possible overloads system in gear motion.
E. BP19B-5S

TRANSFER HOUSING ADJ SYSTEM:

The transfer housing up/down adjustment by lever way to control easily. Some of the model with motor adjusting device, which is more easy to operate.
F. BP19B-5S

FEEDING & CUT-OFF MECHANISM:

By 4 wheel feeding roller-guide to feed the material smoothly into the machine. S-Cam cut off is the same as the center line of main shaft, can bear more force.

SPECIFICATION MODEL(10B~19B)	BP10B-5S	BP13B-5S	BP17B-5S	BP17B-5SXL	BP19B-5S
FORGING STATION	5	5	5	5	5
CUT-OFF DIA (MAX) (MM)	12	16	17	17	20
CUT-OFF LENGTH (MAX) (MM)	105	130	180	240	190
KICK-OUT LENGTH (MAX) (MM)	80(40)	120(40)	175(50)	230(60)	150(50)
PUNCH KICK-OUT LENGTH (MAX) (MM)	20	20.35.50	35	40	35
CUT-OFF QUILL (DIA x LENGTH) (MM)	35x56	46x80	46x80	46x80	60x100
MAIN DIE (DIA x LENGTH) (MM)	50x95	75x130	80x185	80x240	90x170
CENTER DISTANCE BETWEEN DIES (MM)	60	87	93	93	114
PUNCH HOLE (DIA x LENGTH) (MM)	40x95	60x120	60x132	60x200	60x122
RAM STROKE (MM)	160	190	250	340	260
FORGING POWER (TON)	60	90	145	180	160
OUTPUT PCS/MINUTE (MAX)	150	130	120	100	110
MAIN MOTOR (HP)	20	30	50	50	50
LUBRICATION MOTOR (HP)	1	1	1	2	2
COOLING MOTOR (HP)	1/2	1	1	1	1
LUBRICATION (L)	200	200	200	200	300
COOLANT (L)	300	300	300	300	400
APPROX.WT (KG)	13000	18000	30000	38000	42000

SPECIFICATION MODEL(24B~41B)	BP24B-5S	BP30B-5S	BP33B-5S	BP36B-5S	BP41B-5S
FORGING STATION	5	5	5	5	5
CUT-OFF DIA (MAX) (MM)	23	29	34	38	44
CUT-OFF LENGTH (MAX) (MM)	205	270	270	330	410
KICK-OUT LENGTH (MAX) (MM)	190(60)	220(80)	220(80)	280(100)	370(170)
PUNCH KICK-OUT LENGTH (MAX) (MM)	40	45	50	55	60
CUT-OFF QUILL (DIA x LENGTH) (MM)	80x100	95x120	95x140	105x140	115x155
MAIN DIE (DIA x LENGTH) (MM)	115x205	125x240	145x240	160x300	175x400
CENTER DISTANCE BETWEEN DIES (MM)	126	138	156	174	195
PUNCH HOLE (DIA x LENGTH) (MM)	90x164	90x220	110x250	120x290	130x290
RAM STROKE (MM)	320	360	360	440	520
FORGING POWER (TON)	200	300	440	500	700
OUTPUT PCS/MINUTE (MAX)	90	70	70	60	50
MAIN MOTOR (HP)	100	125	150	175	175
LUBRICATION MOTOR (HP)	2	2	2 x 2	2 x 2	2 x 2
COOLING MOTOR (HP)	1	1	1	1	1
LUBRICATION (L)	500	600	800	950	1000
COOLANT (L)	600	700	800	950	950
APPROX.WT (KG)	58000	80000	100000	130000	180000

* WE RESERVE THE RIGHT TO CHANGE THE DESIGNS & SPECIFICATIONS WITHOUT NOTICE.